School Lab CNC Lathe Trainer

School Lab CNC Lathe Trainer

Rugged Machine with Ground Bed.
Stepper Motors with Powerful Stepper Drive for both the Axes.
Constant Surface Cutting Speed
Stick-Slip Motion is Totally Avoided.
Totally Enclosed High Visibility Guard.
Powerful PC Software for Graphic.
Imported Ground Ball Screw with Zero
Variable Speed DC Motor & Drive
For Spindle
Off line help Facility & Programming Facility.
MDI Programming Facility.
Display of Actual Feed Rate, Spindle Speed
In Execution & Simulation Mode.
Various Canned Cycles are provided.
Programmable Dwell.
Automatically Detects Wrong Step
Safety Functions with Emergency Stop,
Over Travel Limits.
Alarm & Self Diagnosis Functions are provided.
Inch as well as Metric Programming.
Subprogram with Repeat Facility.
Manual & Programmable Machine Stop.  

SPECIFICATION:
Center Height: 100 mm.
Swing Over Cross Slide: 50 mm.
Distance Between Centers: 150 mm
Max. Machining Diameter: 30 mm.
Max. Longitudinal Travel: 200 mm.
Minimum Increment: 0.005 mm.
Minimum Movement Command X (Radial): 0.005 mm.
Minimum Movement Command Z: 0.005 mm.
Spindle Inside Taper: MT2.
Cross Slide Inclination: 0 Degrees.
Standard Cutting Tool Size: 16 x 16 mm.
Spindle Motor: VDC Motor, 1HP.
Spindle Motor Speed: 40 to 1500 RPM.
Threading: Straight.
Input System: Metric / Inch.
Axis Control: VSimultaneous.
Interpolation: Linear, Circular.
Rapid Feed Rate X: 700 mm / Min.
Rapid Feed Rate Z: 700 mm / Min.
Speed Override: 20% – 160%.
Feed Override: 40% – 120%.
Repeatability: V±0.020 mm.