School Lab Photometer Glucose
Specification
Photometer, Glucose 201+/SET
Hand-held, glucose photometer Glucose 201+, starter set.
Automated point-of-care device for measuring glucose in capillary whole blood.
Technology: optical absorption and reflectance photometry.
Multi-wavelength photometric measurement at chemical reaction end-point (667 nm - maxi absorbance point, and 840 nm - turbidity compensation).
Provides direct reading from inserted micro-cuvette.
Removable microcuvette holder to allow for easy cleaning.
Correlation with reference laboratory measurements: 0.99
Factory calibrated and continuous built-in auto self-test (when switched on).
Needs no further calibration.
Sample size: 5 to 10uL capillary, venous or arterial whole blood.
Sample collected directly from skin surface into single-use microcuvette by capillary action.
Uses dedicated microcuvette (closed system).
Measuring range: 0 to 500 mg/dL.
Read-out in: mg/dL or mmol/L.
Reading time: 40 sec. to 4 min.
Display informs: glucose reading, reading errors, systems errors, battery status.
Symbols in display facilitate multi-lingual understanding.
Built-in memory, storing > 400 measurements.
Interfaces: RS 232 to printer or computer.
Power supply: 220V /50 or 4 x type AA / R6 1.5 V batteries (allowing for 100h to 150h continued usage).
Supplied as set containing:
1x Point-of-care glucose meter
1 x Set of 200 microcuvettes (8x25)
1 x Box of 200 safety lancets (sterile single-use, auto-disable, incision 2.2 mm)
1 x Set of 5 cleaners
1 x Set of 4 AA / R6 1.5 V batteries
1 x power adaptor
1 x Storage and transportation box
1 x Operator’s manual in English,
Instructions for use
Automated point-of-care device for screening, diagnosing or monitoring blood glucose levels in capillary whole blood.
Used at primary health levels, and for neonatal care.
Shelf life: 9 months from date of manufacture (microcuvette), 24 months (cleaner).
Storage & transportation: 0 to 50C (glucometer), 2 to 8C (microcuvette), 15 to 30 C (cleaner).